Black Ice - Ice Box

[Kevin]

Here's the chiller house. I took a project box from radio shack and dremeled it up so it is just a little bit larger than the chiller blocks itself. It has screws on the top so I can just bolt the thing shut. I still need to drill 4 holes for the hoses actually. I'm gonna wrap the chiller up in neoprene and then fill the box up w/ expanding foam. In order for chillers to be effective, they need to be well insulated. This thing will be amounted above the radiator.
http://www.procooling.com/misc/kevpics/icebox.jpg
UPDATE!!! To get the pic working, right click on the broken link pic. Click properties. Copy the url into your browser heading... it should work then
------------------
"Education without action does nothing"
-Zoli Teglas

[This message has been edited by Kevin (edited 03-12-2001).]

[This message has been edited by Kevin (edited 03-12-2001).]

[This message has been edited by Joe (edited 03-13-2001).]

[phreenet]

Where will the chiller be placed in the cooling loop? and are you using that to cool a peltier even lower? or just a copper block?

------------------
Blah Blah Blah
Overclocked Dual PIII 933
sitting on a VP6 mobo featuring liquid intercooling.
AIM[SN]: PhreeNET

[Kevin]

The chiller is two extra long waterblocks (in the picture that doesn't work... i'm workin' on getting an image hoster). It can hold 3x40mm pelts. I'll have 3 50w pelts in between the two. The hotside is cooled by the big momma. the cold side flows to the proc, chip, and vid where there is a 120w pelt waiting for it. Assuming all goes well (which it never does for me w/ computers http://www.procooling.com/ubb/smile.gif), I should have some LOW temps.