SMP Anyone?

[Joe]

Anyone else dealt with a cooled SMP solution??

------------------
C-ya
Joe

[napalm]

Haven't had any experience with SMP cooling yet but when I build my new system [hopefully soon!], I'm plan to buy an Abit BP6 with 2 Celeron 366s or 400s. Depending on how long I wait I'm thinking about possibly going with Powerleap PPGA to FCPGA converters and p3-550e's. This would increase the price by at least $650 though! The good thing though is that I'm hoping I can overclock them to about 775+ MHz a piece with either peltiers or water cooling. If you need any help with the site or news I'd be glad to help. :)

------------------
TJ Bain
Yes! I finally found out what a "jumper" is!
ROTFL!

[Joe]

Make sure you got bandwith for Saturday or Sunday!!

The article that I am gonna make for the Project is going to include Stereaming RealVideo, and ALOT of GREAT quality pic's. I am borrowing a nice couple megapixel Digital Cam, and also a video cam to document it.

Its gonna be rock'n!

ALSO
The guys at Coolchip.com have really been just great to me and the site. Because of them I will be doing 2 articles in a VERY short period of time. Still thinking of the proper "code name" for the next project but its going to be a SMP Celeron setup with their new S370 Coolers strapped on for the ride.

Stay tuned!

------------------
C-ya
Joe

[W2krules!!!]

I have BP6 with 2 366's at 551 Mhz at 2.2 Volts and Running air cooling with alpha coolers on them... and cpuidle pro and cpu1 temp average no load 36C cpu2 36C Motherboard 40C errr. those are the temps with full 100% after approx 30 mins... no load is CPU1 30C CPU2 30C Motherboard 32C

[shadow]

w2kr - sounds like you can benefit from some better case cooling.

shadow.

[fuzz]

i was running a 694d w/ 2x 366@550 celeries. i was using watercooled peltiers before i scrapped it and sold it all. i didn't need the cooling. they still ran at 550 w/ gorbs. i just wanted to try h20/pelts out.

Fuzz Norelid

[t-dogisdabomb]

im setting up a abit bp6 with two celeron 400's, i need an anwser here, do you think they would clock to 500 with just real good hsf's( like alpha and gorbs) or do you think i should go with 2 alpha pep66t's? LMK

[Joe]

The Celerons will like a bit more cooling then a standard HSF. To get a good stable OC, you may want to go with the better HSF's.

Wow I was amazed when I saw the dates on this thread http://www.procooling.com/ubb/smile.gif hehehehe Over a year ago.. wow

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

[mfpmax]

I was gonna H2O cool my Dual Celeron 533 system, but I kinda lost one of the chips, don't have the SMP APIC module to run SMP, didn't have 2 heatsinks to make waterblocks out of, and don't/didn't have the money for a pump. But I might try later.

------------------
Watercooled K6-2 450 at 600 (http://mfpmax.tripod.com/oc2/)

[Joe]

heheh you were just a lil short on a lot of stuff http://www.procooling.com/ubb/smile.gif

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

[mfpmax]

You can say that

------------------
Watercooled K6-2 450 at 600 (http://mfpmax.tripod.com/oc2/)