PDA

View Full Version : Pics of my watercooled rig's construction


melvyn
05-06-2001, 03:33 PM
Thought these might be of interest - pics of how I put my own version of Pro/Mini (thanks for the inspiration, Joe :) )

1) 4x6" radiator and 120mm Panaflo M1A fan:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976589

2) Front of chassis complete with mesh filter for fan intake, and duct tape blocking off unneeded holes:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976588

3) Radiator/fan ducting under construction. The outer carton that my Dremmel came in was the exact size I needed:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976596

4) Ducting completed, with loads more duct tape. Pump is mounted with grommets in the case holes, and closed cell foam underneath. There is just enough room for my Iwill KK266 to fit on the mobo tray:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976599

5) The back of the case, where originally there were no fan provisions, now takes two 80mm Sunon's:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976570

6) Iwill KK266 motherboard with the OCWC copper polyblock, 512Mb memory and blue orb chipset cooler installed:
http://albums.photopoint.com/j/View?u=1665387&a=12835550&p=47976581

I should soon get some pics of the finished system on-line for your appraisal.

Joe
05-06-2001, 04:00 PM
Wow Cool!!!! nice setup

BrokeASUstudent
05-09-2001, 12:51 AM
I like the idea of duct taping the unneeded holes. I did that to the back of my case, but it never occured to me to do the front. I'll be looking into that soon. Thanks for the idea, and your rig looks clean and professional.