PDA

View Full Version : swifty 462+ with aero 7+ blower


Yangster
06-21-2003, 03:52 PM
How well do you think the blower on a aero 7 fan would work on a 462?

SparkedFire
06-21-2003, 05:39 PM
tell me if i'm wrong, but i thought the aero 7+ was a poor performer in cooling. You could look around and find a blower that exactly fits your needs and size. Get a good blower and a raoistat so you can adjust the fan speed, or just let it run. Some have built in temp sensors.

bigben2k
06-21-2003, 06:37 PM
The blower needs to be of a fair size, to work well. The Aero7+ blower, from what I've read, has been increased by 1 cm.

I just picked up a blower from an old Mercury Grand Marquis: ~6 inches in diameter ;)

hara
06-21-2003, 06:39 PM
That's all subjective :)

Given the low noise the airo makes and its price and features, I consider it to be a very good cooler indeed.

soja
06-21-2003, 07:07 PM
Doesn't the fan blow 20cfm at max speed? My original swifty 462 performed at its best with a 68cfm 80mm delta. When I put a 39cfm sunon on it the performance was poor. The swifty just begs for more air.

hara
06-21-2003, 07:25 PM
You have to look at the PQ curve of the fan to know the real performance of the fan. Granted, the blower on the aero isn't a good free flowing fan but with the restrictive nature of HSs, it performs well. Keep in mind there is no dead spot with a blower also.

soja
06-21-2003, 07:30 PM
Raising the fan on the swifty helps 3-4c (at least from my experience anyway)

http://supasoja.homestead.com/files/modedswifty.jpg
80mm delta on top of an empty 80mm.

1398342003
07-18-2003, 04:09 PM
I have been wondering how the Aero 7+ would perform on different retail heatsinks. (swiftys, alphas, slks, ect) Is anyone willing to test one?

bigben2k
07-18-2003, 05:06 PM
Why not take it to the next level?

Take a blower, tack it to the side panel, and duct it over the CPU. ;)

1398342003
07-18-2003, 05:12 PM
I wasn't thinking of doing this myself, I'm interested in the cooling performance of the Aero 7+ in comparison to higher flow axial fans.

airspirit
07-23-2003, 12:27 PM
I've installed a number of Aero7+ heatsinks and their performance is outstanding. I don't know what the complaints are ....

airspirit
07-23-2003, 12:41 PM
I guess I should add that the case fan arrangement for maximum performance is different from that of a standard HSF. When I turned the door fan from blowing in to out, I noticed about a 3C improvement. It takes a bit of finessing your fan arrangement to make it work well.

1398342003
07-23-2003, 03:06 PM
I don't know what the complaints are ....

No complaints here, I just want to know how one of the Aero 7+ FANS would perform on the other HSFs.

Daleon
08-12-2003, 10:10 AM
I have the swifty 462+ and a Tornado 80mm. I can't stand the noise anymore and have to find a new solution. Together they don't cool all that great also. I idle pretty high, load max is about 42c decent oc.

1398342003
08-12-2003, 09:53 PM
What processor are you running at what speed and Vcore? What is your room temperature? How many case fans do you have and what type are they?