Vidur
06-11-2004, 03:29 PM
Finshed the case a little while back, all up and running, heres a couple of shots.. Thanks to all those that provided helpful info! :thumb:
Spec:
CPU: Intel P4 3.06Ghz
Motherboard: Asus P4T533 Hyperthreading enabled
Memory: Samsung major PC1066 42 bit Rambus 512(x2) RAM
Storage: 240Gig (120(x2)) RAID Array Setup
Media: Sony DRU 500A
Networking: Linksys Wireless 802.11g
Power: Antec 550w Fully Sleeved PSU
Cooling: Watercooled
Waterblock: InnovaCOOL Rev4 (Blue)
Radiator: Innovatek Single Fan 120mm Radiator
Reservoir: Tank-o-Matic (Blue) External
Fans: x3 Antec 80mm Blue LED, x1 120mm Antec Blue LED-All controlled by the Rheobus 2.5 kit.
Mods:
Lights: x3 UV Sunbeam Cold Cathodes
Feet: Logisys LED Acrylic Footsteps
Lining: Flexible Chequerplate
Switches: x4 Vandal Resistent
Fan Controller: Rheobus 2.5 Kit
Here's a shot of the top with the radiator, switches and rheobus 2.5 kit
http://server6.uploadit.org/files/vidurpatel-DSC00935.JPG
http://server6.uploadit.org/files/vidurpatel-DSC00936.JPG
This is the side view of the wavemaster with the tank o matic fitted on the back..
http://server6.uploadit.org/files/vidurpatel-DSC00937.JPG
Another side view with the UV lights on in the dark
http://server6.uploadit.org/files/vidurpatel-DSC00941.JPG
A close up of the water cooling inside
http://server6.uploadit.org/files/vidurpatel-DSC00942.JPG
And finally a pic of the checker plate used to line the inside of the case..
http://server6.uploadit.org/files/vidurpatel-DSC00948.JPG
Thanks.. All comments are welcome
Vidur and Nik
Spec:
CPU: Intel P4 3.06Ghz
Motherboard: Asus P4T533 Hyperthreading enabled
Memory: Samsung major PC1066 42 bit Rambus 512(x2) RAM
Storage: 240Gig (120(x2)) RAID Array Setup
Media: Sony DRU 500A
Networking: Linksys Wireless 802.11g
Power: Antec 550w Fully Sleeved PSU
Cooling: Watercooled
Waterblock: InnovaCOOL Rev4 (Blue)
Radiator: Innovatek Single Fan 120mm Radiator
Reservoir: Tank-o-Matic (Blue) External
Fans: x3 Antec 80mm Blue LED, x1 120mm Antec Blue LED-All controlled by the Rheobus 2.5 kit.
Mods:
Lights: x3 UV Sunbeam Cold Cathodes
Feet: Logisys LED Acrylic Footsteps
Lining: Flexible Chequerplate
Switches: x4 Vandal Resistent
Fan Controller: Rheobus 2.5 Kit
Here's a shot of the top with the radiator, switches and rheobus 2.5 kit
http://server6.uploadit.org/files/vidurpatel-DSC00935.JPG
http://server6.uploadit.org/files/vidurpatel-DSC00936.JPG
This is the side view of the wavemaster with the tank o matic fitted on the back..
http://server6.uploadit.org/files/vidurpatel-DSC00937.JPG
Another side view with the UV lights on in the dark
http://server6.uploadit.org/files/vidurpatel-DSC00941.JPG
A close up of the water cooling inside
http://server6.uploadit.org/files/vidurpatel-DSC00942.JPG
And finally a pic of the checker plate used to line the inside of the case..
http://server6.uploadit.org/files/vidurpatel-DSC00948.JPG
Thanks.. All comments are welcome
Vidur and Nik