Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Hardware and Case Mod's (http://forums.procooling.com/vbb/forumdisplay.php?f=20)
-   -   Acrylic cube (http://forums.procooling.com/vbb/showthread.php?t=11051)

torin3 12-20-2004 11:38 AM

Acrylic cube
 
I think I'm ready to start designing/making my gamer box from the ground up. I currently have an AMD system in a full tower case with watercooling setup. I'll be adding a peltier later this week, but I've found that even with a full tower, it is pretty cramped in there. There is still open space, but not where I need it.

My idea is for a 18" sq cube made out of uv reactive acrylic. Tentatively, I'm planning on mounting the motherboard on the bottom of the case on the left side. Most of the right side wall will be a radiator large enough to mount 2 or 4 120 MM fans on. The drives (dvd/hd) will be on the front wall, left hand side. Resivour will probably also be on the front wall to the right of the drive bays.

The areas I'm looking for help in are:

1. moderately inexpensive motherboard suggestions for AMD64 CPUs that are overclockable and look to be able to handle likely future AMD64 chips.

2. Dimensions and locations for mounting screws for motherboards so I can have the acrylic laser cut.

3. Any other suggestions that may be helpful.

Thanks everybody, and I'll make sure to take plenty of photos to document this project.


All times are GMT -5. The time now is 03:27 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...