waterblock Clamp Needed
 

I need a clamp that will give 1.5" of clearance above the SOCKET 370 cpu because I have block/peltier/coldplate sandwiched together and they are 1.5" in height. Any ideas where to get one that big? I ordered one with my poly block but it didn't come in the package and was wondering where to get one at?

------------------


Matt Simmons cinamon@graceba.net http://wwp.icq.com/38600739
Tech+ Certified www.abitcentral.com www.cinamonman.com



[This message has been edited by cinamon (edited 12-13-2000).]

if you have access to a drill you can make one by taking 3 peices of Aluminum ( thich peice at the top and 2 thin ones down the side drill them the proper places, annd bolt it all together. Ask Chip at OCWC, dunno if he has something that would work for ya.

and if he forgot the Clamp for your poly block, give him hell! http://www.procooling.com/ubb/smile.gif

Hey cinamon, "you got mail" about a clamp!

------------------
THUNDERBIRD 800@1010MHZ,WATERCOOLED
18 GIG SCSI,BLACK HX08 homepage www.highvoltagepc.com

man 1.5 inches is some thick components. If the guys in the previous post were not able to take care of you , shot me an email. I positive I can set you up with a clamp that will hold all this secure.

Buster

I made my own clamp out of a quick grip from home depot.
http://people.ne.mediaone.net/sullyfish/clamp1.jpg

I know crappy picture..... cool clamp though. http://www.procooling.com/ubb/smile.gif

Apparently you made your own block too http://www.procooling.com/ubb/smile.gif

Actually I've made several.

The one in the shot of the clamp is the best.

Most of the time my P3 600e stays in the 70's.

And it's at 984! 1.9V

http://www.overclock-watercool.com has some nice ones(under hardware listing)