me future WC setup
 

k

i'll be putting in some UV Leds in my waterblock, flowmetre and res.

now i need some help with me flowmetre~ can someone show me what kind of prop i should make to use in the flowmetre? need info
thx

now on to my heater core (if most of u remember i have the 2001 BMW one :D pic below) i have 2 comair rotrons that i will use but i don't know if they should blow or pull :confused: and should i put 3 92mm on the other side

the comairs will be on a reo and if i will be using the 3 92's they will be always on

what u think...? i know, i know lots of crap typed :D and jumpy jumpy w/topics :D :D

thx all

oops

the flowmetre is 60mm OT and 40mm ID

I'm still in love with that heatercore ;)

I'd put the two comairs roughly 1/3 in from either side, and run the 92mm's on the other side in the spaces where the comairs aren't. I doubt it'd matter which side the fans are on

ya love the HC too

i'm cleaning it and the casing is all steel, just needs to be sanded

the fins are copper :eek: some ketchup cleaned it very nicely

CLR sucks! i wasted $8 bucks on it :/ ohwell

i'll try to get some pics once i finsh cleaning the HC


now i need some info on what kind of prop to make for the flowmetre

i was thinking something like this(without the dots)

....|
---o---
....| <------ water this way


later

i got me LEDs and some other junk today
UV LEDs RuLe!

here's what my flowmeter will look like

and this is what my block will look like :D

im somewhat lost on your block. Does the water enter over the centre, and exit on the side?

it might be either way

in the centre & out the side or in the side & out the centre