Ultimate Water Cooler
1 Attachment(s)
Saw this in the window of a local computer store and thought I'd pass it along. This is a dual processor PII server board imersed in a fish tank. It is acually powered up and operating. There is no fake seperate compartment for the MB like you see the tanks with the canary in it. You can see the bubbles come up around the CPU. Has to be distilled water. No real question here, just wanted to share.
Enjoy |
Re: Ultimate Water Cooler
Its mineral oil. The idea has been done a lot but without some kind of heat exchange, any modern processor would heat the oil too fast. Here is one I did:
http://i200.photobucket.com/albums/a...a/DSC00249.jpg If you want to do this yourself, make sure you use oil (motor oil, vegetable oil (which can rot and may have salt), or mineral oil (very expensive)) But remember this is for fun, its not actually useful. Just remember those P2 kalamaths don't make as much heat as a C2D. Here are a few ideas that could make this a decent setup: 1. cover hard drive in a thin layer of silicon leaving dry spots to stick heat sinks and then let it get oil cooled too 2. use a pump suited for thick liquids to move the water through a heat exchange to get rid of that extra heat 3. Use a compressor to cool the liquid in the tank (but use a plastic tank and insulate it) What the one you showed dose: 1. Looks nice 2. May keep quiet for a little while But keep in mind that those P2s are fan less anyway! :) Now the system I did had an air pump to make bubbles and circulate the oil which dose help a bit but the oil did get pretty hot. It was a celeron 2.5 and geforce 6200. And welcome to the best cooling forum on the net! |
Re: Ultimate Water Cooler
That actually could be water. Looks pretty clear for oil. Pure water is not conductive.
|
Re: Ultimate Water Cooler
It was water. It was too clear to be oil and the bubbles acted as if they where in water. If you use distilled water, all the impurities are removed and then it isn't conductive. Even the fans on the power supply were turning. Just a thought, if you leave the heatsink and fan on the CPU, even a P4, the fan would move the water past the fins to take the heat from the heatsink. The next problem is how big of a fish tank would you have to get or would you have to use a rad to get rid of the excess heat?
|
Re: Ultimate Water Cooler
Quote:
|
All times are GMT -5. The time now is 02:00 AM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...