Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   Csp Mag Ii ??? (http://forums.procooling.com/vbb/showthread.php?t=13085)

Szandor 04-19-2006 06:11 AM

Csp Mag Ii ???
 
Hi!

I'm starting my layout & parts list for a SFF water cooled set-up & was wondering if there is any further news on the CSP MAG II & when it might be available for purchase, anyone have any updates???

Regards, Szandor

Dave 04-22-2006 06:27 AM

Re: Csp Mag Ii ???
 
Sorry been away yet again.

This week I believe and we only Sell OEM now, so it will have another company name on it.

Can say who's... not my place too do so.

I also understand they may offer 12W and 16W units soon as well.

Szandor 04-22-2006 06:33 AM

Re: Csp Mag Ii ???
 
Thanks for the update Dave!

Will the base model still be 8W or do the 12W & 16W models replace them?

I'll keep an eye out for the pump

Regards, Szandor

Dave 04-23-2006 06:26 AM

Re: Csp Mag Ii ???
 
8W is all you really need, but it is hard for people to understand this :(

8W standard, 12W and 16W units my be offered by our client, it is not up to me.

Szandor 04-23-2006 10:03 AM

Re: Csp Mag Ii ???
 
Yeah, the 8W model would be fine for my uses, I was just waiting for the MAG II as you had said there would be some design changes/tweaks.

Will the 8W model get the upgrade to the new design or only the 12W & 16W models?

Thanks again for the info!

Regards, Szandor

JamesAvery22 04-25-2006 11:55 AM

Re: Csp Mag Ii ???
 
is the Mag-II related to the pump mentioned here?

New pump big enough?


Any specs on any of the 8W standard, 12W and 16W units?

Szandor 04-25-2006 03:45 PM

Re: Csp Mag Ii ???
 
Looks to me like that thread concerns a custom OEM pump for AVT

He's talkinng about 25-30watt power consumption as well

Lee "Robotech" Garbutt did a reivew of the standard 8watt model available now at Danger Den & others though his was the 3/8" barb version with the input & output on the same side of the pump.

Regards, Szandor

Dave 05-05-2006 08:00 AM

Re: Csp Mag Ii ???
 
Guys it is like this, AVT nor C-Systems no longer has any interest in the retail market.

However many of our clients do, and so I can not comment on what we do or do not have in an open forum.

There are several pumps coming on the market (or already out) using our technology, in different wattages, flows, and pressures.

It is best you ask companies like Danger Den whats coming, and what you would like.

We are producing a different pump almost every month here, and some should find there way to retail.

As for MAG II, it's has small changes over MAG I, in bearing, impeller, and stator design. The main difference being all injected case, and therefore cost savings.

What I would like to really see, is a company willing to risk releasing our magnetic suspension- fluid bearing only models to general public. This units are very quite and are at date only being used by OEM companies in sealed closed loop systems. The risk being these pumps must have 100% clean fluid, any particles will damage pump. Also likely clear to everyone, you can not run them dry - what so ever.

JamesAvery22 05-05-2006 08:56 AM

Re: Csp Mag Ii ???
 
Thanks for the clarifications Dave. There aren't many posts here but I know a lot of people are watching and I'm sure they appreciate the info :)

Soooo who works at DD?? :D

ProHandyman 05-05-2006 03:31 PM

Re: Csp Mag Ii ???
 
Here is a retail magnum: FluidXP+ Magnum. It is of the 8 watt variety. not sure if they, or who else will be coming out with others, other then possibly DD.


All times are GMT -5. The time now is 02:04 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...