Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   Recomendations for Project double header (http://forums.procooling.com/vbb/showthread.php?t=724)

shadow 02-24-2000 09:47 PM

Recomendations for Project double header
 
MORE airflow past the ENTIRE surface of your radiator.

If you have a house fan nearby grab that just to test it.

If the radiator is warm to the touch there is a real good chance you can wisk away a decent amount of heat from the water still.

Also if you could do us/yourself a favor by taking temps of everything you can. Water, waterblock, hot side of water block etc.

shadow.

Joe 02-24-2000 10:36 PM

Hey I would happily take temps of that stuff, but I dont have the equiptment. Sorry, but cant afford that stuff right now with all the hardware I am moving around.

DONATIONS WOULD BE NICE!! .. Hint Hint

I am going to get me a IR temp reader, one of those instant jobbers. I can use it for tuning the engines on my R/C cars/boats so I can justify the 200$ for it.

I am going to be looking at Meci for a bigger 120v fan, something thats maybe 8" diameter or bigger. I am also planning for another mother of a project that will consist of 2 maybe 3 pumps, 6 tec's, and 4 water blocks and a few micro coolers. Also going to a bigger 1/3" tube for the main coolant runs.

When I have a design thought up I will happily post it.

Thanks for your feedback. But in perspective the temps I am getting off these chips isnt that bad. I was looking at my K6-2 350 and it runs at 115 Deg with its stock fan/heatsink. So the 95 Deg for a OC'd P-2 doesnt seem that bad.

But I want better http://www.procooling.com/ubb/smile.gif

------------------
C-ya
Joe

Rich W 02-25-2000 01:26 AM

How much is a 6" or 8" AC fan from Meci?

Joe 02-25-2000 11:01 AM

I cant find a 6 or 8" fan that runs at 120 or 12v. I can find a 6" but its a 220V fan http://www.procooling.com/ubb/frown.gif

I am just going to get 3 more of the 4" metal Box fans that I have now and use a few to cool it.
for 5.95 you cant go wrong!

------------------
C-ya
Joe

shadow 02-25-2000 11:14 AM

Allright bro, I *might* be able to get you a sucker that can take up to 8 temps, only problem is that it polls on intervals of 10.5secs, still you should find it most useful, that's if I can get it before I need to use it myself. It might have to wait till after I am all done with my crap, who knows.

My point about the fans and radiator is that you should still be able to go ALOT lower if the radiator is indeed warm. You might be able to get another bin speed or two out of it.

I'm just trying to help bro. Sorry if I come off another way.

shadow.

[This message has been edited by shadow (edited 02-25-2000).]

Joe 02-25-2000 11:27 AM

Oh no.. I understood exactly what you were saying!! and I really appreciated it!

I am working on getting temps more often and from various sources, so I am also shopping around for different temp sensing devices. But I just cant quite afford the nice instant IR/laser temp reader (it has a aiming laser in it so you know exactly what you are taking the temp of. Very usefull in a crowded case, it costs over 180$ though so I am waiting.)

At spring comdex they did have a company that made a in faceplate temp gauge that also would control fans, and would monitor 4 devices. I am going to try and find the company again... it was VERY cool.

Thanks again for your feed back! and your 8 way temp device would be fine, but I would think you should use it first and then if you dont want it then a donation would be very cool!

------------------
C-ya
Joe

[This message has been edited by Joe (edited 02-25-2000).]

shadow 02-25-2000 03:46 PM

well I prolly never gonna "not" want it bro, I am doing the same things as you, I can lend it to you tho mate. I can also help you find what you are looking for www.millisec.com.

shadow

Daveg 06-10-2000 09:08 AM

Are you the same Shadow that built a water/peltier cooler that used two drift0.8's ?

BruiseAndy 11-21-2000 06:27 PM

Check this out. The auction is over but you may be able to throw a deal at him. http://cgi.ebay.com/aw-cgi/eBayISAPI...item=498002335

eTiMaGo 11-22-2000 05:30 AM

hmmm a simple idea to improve radiator efficiency... simply placing two 120mm fans over the radiator only effectively cools the circular area right beneath the fans, right? so why not leave some space between the fans and radiator, and duct the edges so that the whole radiator surface is exposed? You'll also need to make the holes in the side of the casing rectangular, so as not to disrupt exiting air.

Apart from that, i only have one word to describe the DH3 preview: SCHWEEEEET!

Joe 11-22-2000 09:31 AM

I agree about standing off the fans from the radiator... I MAY still do that on DH3, I know I can prolly get a 3 deg drop in temp doing that ( via testing Chip @ OCWC did).

but I am concerend about how much space I have to play with and also how much of a pain it may be.

I am ducting with some electrical tape the 120mm fans over the 4" radiator so all the air from the fan must go through the radiator.



------------------
C-ya
Joe

eTiMaGo 11-25-2000 10:44 AM

man, joe, the more i look at that case, the more i think "wow"... Actually i must say you've prompted me to try and house my complete watercooling system (nowhere as complex as yours, just a simgle pump, radiator, and waterblock) into my smallish mini/midtower Enlight 7105E... It can be done, I have about 12x30cm maximum space to fit a radiator on the side, but i will have to hack up the motherboard tray, and make the side panel attached to it...

Hhehe and i'll also have to modify my pump to become inline, by siliconing a brass "nipple" onto the bottom... would that work? or are the designs completely different?

Apart from that, hurry up and finish the write up http://www.procooling.com/ubb/wink.gif

Will 11-25-2000 08:35 PM

http://www.bgmicro.com/pdf/page1.pdf

It is basically a 150MM fan that runs on 12V. Provides a bit of air movment (235CFM) but it is rather loud, good thing about it is that at 7V it is really quiet and still pushes 140 CFM ... if you have a wide radiator it would do wonderfully.


All times are GMT -5. The time now is 01:43 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...