Post your watercooled pictures
After doing a little searching, i was surprised to see there wasn't a dedicated thread for showing our watercooled setup. Before starting the watercooling project, looking for other people's setups was a bit of a chore. Hopefully this can be a semi-centralized location where we can all share how we setup the innards of the case.
here's my rig http://geeksupport.com/images/forums...442/h2o_v1.jpg http://geeksupport.com/images/forums...7442/uv_on.jpg (2xUV Lights. one on the bottom of the case, another hiding along the top) Case: Lian Li PC65 Rad: DTek Pro Core Pump: Eheim 1250 Tubing: 1/2" ClearFlex60 CPU Block: WhiteWater GPU Block: Maze 4 Additives: Water Wetter / DTek UV Visible Blue Extra Info: Yes, I cut the 3.5" HD Cage to fit the pro core. it was cut just deep enough so that the lower 3.5" blanking plates would still fit. The T-line going behind the floppy drive is where the air trap is hiding. the water-flow doesn't seem to be as strong as i had hoped, so after finals, i'll re-do the tubing. Electrical tape was used to prevent any possible shortages and rubbing against the side-panel window as i'm using worm clamps. If anyone needs webspace for their system pics, drop me a PM and i'll host it. Folks new to watercooling can see my progression pictures (Warning: I uploaded these directly off the digicam) |
Sorry for wrecking Your whole thread idea, but is that possibly a Titan aluminium fan on that heater core?
If so, is it noisy? I´m just about to order a heater core and a good 120 mm fan, and the Titan is the one I´m thinking of. regards Mikael S. |
no worries.
short answer: yes long answer: it's okay but i also have a rehostat so if i feel it's too loud, i lower it down |
1 Attachment(s)
This was done over a year ago. Doing another :D
|
nice looking case!
mind if we take a look under the hood :) |
1 Attachment(s)
Thanks! Sure, internal view:
|
Re: Post your watercooled pictures
Quote:
http://forums.procooling.com/vbb/for...?s=&forumid=26 We also have a Hardware & Case mods Forum: http://forums.procooling.com/vbb/for...?s=&forumid=20 |
Re: Post your watercooled pictures
Quote:
|
Gotcha...
I'm in favor of keeping the tubing as straight as possible, and "tug free", which can tilt a block off the core.:eek: Here's pHaestus' article on the subject: http://www.procooling.com/articles/h...s_with_h2o.php In short, avoid mitre elbows, and if possible, go with two 45 deg copper sweeps. That's what I plan to use in my rig, for every significant turn of the tubing, with clamps, of course! |
thanks for the link :)
http://www.procooling.com/articles/a...low-bettar.jpg stolen from pH's article |
I will be posting my project pics as soon as I start it next week when I receive my new case. My current case is too small for some of the things I want to do with it.
|
|
Nice Nik!
How do you like that cube? |
Nikhsub1,
Wow!:drool: Most impressive indeed! Dual cores and your Iwaki MD15 quite a combo. How large of a temp drop did the duals give you? What case is that? Have you tried to increase your O/C with your increased cooling? Luck? |
Thanks guys, the case can be had at www.mountainmods.com tell ben Scott sent you ;) My temps have dropped 5 - 6C with the new case/dual cores. Nothing else changed. My OC remains the same however, maybe a ram issue.
|
RE
|
Waterchill Pump and Zalman waterblock.
Waterchill Radiator but soon to be changed to a nextcool w-zero x1. System is a Pentium 4 2.0A o/c to 2.5GHz in a CoolerMaster 201B BXT. http://www.h4x.nu/spike/wc1.jpg http://www.h4x.nu/spike/wc2.jpg Might invest in a Maze4 watercooling kit later in the year. |
|
|
Spike... how's the zalman wb performance??
|
Better than the waterchill block :p
|
http://www.uploadit.org/files/310703-gibinside1.jpg
http://www.uploadit.org/files/310703-gibinside2.jpg http://www.uploadit.org/files/310703-full48k.jpg I like red. :) White Water Rapids Danner Mag 5 (I know the Mag 3 is a better choice, but I was a n00b) 1973 Chevy Caprice Core Clearflex 60 |
Quote:
|
1 Attachment(s)
This is mine, CPU & GPU water cooled with my own made blocks, the rest of the cooling system is outside of the box
|
Here is my old setup, my new computer is just air cooled :(
http://www.xyrka.com/watercool/image...p/sidecase.jpg |
All times are GMT -5. The time now is 11:53 AM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...