Pro/Forums - FS: Swiftech MCW462-UH

[EDIT] Sold! Thanks for your interest.

I have one Swiftech MCW462-UH waterblock I'd like to sell. It has been used for approximately three months in my rig (I use a solution of distilled water and 3% Water Wetter, with a small amount of blue dye). It is in great condition, and is being sold in the original box complete with instructions and mounting hardware. Please note that there are a few pieces missing from the mounting hardware, but that these parts are extras that Swiftech includes anyways. A complete list of contents is:

1 x MCW462-UH block with 1/2" (nylon?) tube barbs
4 x 6-32 x 1 1/2" screws
4 x standoffs
4 x springs
7 x 0.230x0.096 nylon spacers (should be 8)
5 x 0.220x0.046 nylon spacers (should be 4)
4 x 6-32 nylon hex nuts (one is a bit of a tight fit; came this way)
5 x black fibre washers (should be 8)
1 x Arctic Alumina thermal grease
2 x P4 brackets
4 x 4-40 socket screws

Also included is:

4 x 6-32 steel hex nuts
4 x 3/16" fibre washers

These last two inclusions are the parts that I used instead of the nylon washers included with the Swiftech hardware, as I prefer to have the more solid steel nuts (I can use krazy glue and not worry about breaking the nut this way). Please note that the block is sold as is, though I will say that it's in great condition. I've included a few pictures of the block and contents in order to prove this; you can see my UofT keychain in some of the pictures to guarantee that they're genuine (sorry about my lack of hosting at this time :( ).

I can be contacted via a personal message, or through e-mail at mike.robbins@utoronto.ca. I'm asking $40US (or best offer) for the block, and the buyer pays for shipping. If there are any questions, please feel free to contact me.