Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Heatsink/ Heat Pipe / ThermoSiphon Cooling (http://forums.procooling.com/vbb/forumdisplay.php?f=13)
-   -   Notebook heatsink idea (http://forums.procooling.com/vbb/showthread.php?t=12025)

lmg 07-30-2005 06:06 PM

Notebook heatsink idea
 
I need to build a tray for my notebook computer (AMD Athlon 64 3200+), and I'm considering ways of passively keeping the notebook cooler. (I don't want fans.) None of the commercial notebook coolers really appeal to me. I'm undervolting the CPU with RMClock and don't really have any thermal problems, but the bottom surface of the notebook tends to get pretty hot, especiall underneath the 7200RPM hard drive where the air gets up to 36C at idle.

What I'm considering is placing a large plate of 1/8" thick copper underneath the laptop. There would be 3 or 4 solid copper blocks raising the laptop off the copper plate by about 1/2". These blocks would contact the laptop at the hottest spots, hopefully acting as heat sinks. I would put thermal pads between the laptop and the blocks to prevent scratching the finish. I also thought it might make sense to cover the top of the copper plate with an insulator like sheet cork, the idea being that any heat conducted to the plate would not be radiated right back up into the laptop.

Does this make sense, or am I on the wrong track or just wasting my time?

\\«WÎÑG»// 08-23-2005 09:00 PM

//edit I'm just gonna pull everything stupid out of this post and leave the rest -pH

killernoodle 08-23-2005 10:33 PM

Is the laptop stable when running full load at the rated speed? If it is, it doesnt matter how warm the laptop is getting. Laptops are designed to run at their rated speed, no matter what the environment is (within reason). I wouldnt worry about it.

567234ta 08-30-2005 05:45 PM

sounds like a heavy thing to have your lappy on. check this out.
less than 1 pnd, its nice in a vehicle as i can game with a real mouse while traveling.

http://www.cryo-laboratory.com/uploa...ture%20001.jpg
http://www.cryo-laboratory.com/uploa...ture%20002.jpg
http://www.cryo-laboratory.com/uploa...ture%20015.jpg


All times are GMT -5. The time now is 02:55 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...