AGP riser faceup over slots? HELP!
 

I was given an old reel-to-reel player and I'm makeing a computer case out of it but I need to lay my vid-card on its side. I have found risers that lay it down over the cpu face up and risers that lay it down over the slots face down. I'm looking for on that lays it down over the slots but face up!

I did a little bit of searching to find somthing that would "flip" the card over then use a regular riser on that but I couldn't find anything like that ether.

:)

Heh, good luck. Your cards back edge would then be inside the case, making for a very interesting monitor connection. If you're all gung ho about it, you're best bet would be to kluge something together out of a AGP cardedge on a custom PCB with a reversed socket on the perpendicular. All I can offer is a place to get the socket for about 4.50 US. Mouser part # 571-1452751
Again, Good Luck...

http://www.adexelec.com/extenders.htm

Here's a whole bunch :) .