Pro/Forums
(
http://forums.procooling.com/vbb/index.php)
| sandman |
05-30-2004 06:20 PM |
would this drillpress handle copper?
|
| jaydee |
05-30-2004 08:50 PM |
Quote:
Originally Posted by sandman
|
Yeah, I got the same one just under a different brand name. Works ok. Just use short stubby drill bits so they don't flex and drill slow with WD-40. |
| sandman |
05-30-2004 09:18 PM |
Quote:
Originally Posted by jaydee116
Yeah, I got the same one just under a different brand name. Works ok. Just use short stubby drill bits so they don't flex and drill slow with WD-40.
|
Awesome, thanks. |
| Etacovda |
05-31-2004 08:28 AM |
They tend to shake a lot when you get above 10mm diameter drill bits. Does work, but make sure you've bolted it down to a table nicely before hand ;)
|
| sandman |
05-31-2004 10:22 AM |
Quote:
Originally Posted by Etacovda
They tend to shake a lot when you get above 10mm diameter drill bits. Does work, but make sure you've bolted it down to a table nicely before hand ;)
|
Lol, alright. Is that just because it's only 1/3hp or what causes all the shaking? |
| SlaterSpeed |
05-31-2004 10:30 AM |
it shakes because the spindle speed is too high. Turn the speed down if you are using big drill bits :)
|
| jaydee |
05-31-2004 10:37 AM |
What Slater said and the spindle/chuck on mine is a little wobbly aswell. The bigger the bits the more effect the wobble has. These are not precision drill presses but they work fine.
|
| sandman |
05-31-2004 11:17 AM |
Ok, awesome. Now, I just gotta convince my dad he needs this. :D
|
| DeadEye |
06-01-2004 10:35 AM |
Quote:
Originally Posted by sandman
Ok, awesome. Now, I just gotta convince my dad he needs this. :D
|
Convince him he needs a Cross-Vice too :) |
| FizzledFiend |
06-06-2004 10:06 AM |
I have this drill press albit a bit older. The drill chuck is a tapperd shank and doesn't always get in properly thus a bit of a shake or wobble..you can actually center it with a dial indicator and a hammer ;)
|
| All times are GMT -5. The time now is 09:19 AM. |
|
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...