Pro/Forums
Page 1 of 2 1 2 >
Show 30 post(s) from this thread on one page

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Heatsink/ Heat Pipe / ThermoSiphon Cooling (http://forums.procooling.com/vbb/forumdisplay.php?f=13)
-   -   Disgrace! (http://forums.procooling.com/vbb/showthread.php?t=1465)

Kevin 10-27-2001 03:29 PM
Disgrace!
 
We actually have a section for aircoolers.... :(
hehhee
-Kev

Joe 10-27-2001 08:12 PM
we are an equal opporotunity cooler :)

warp_zero 10-28-2001 03:24 AM
air cooling is just as much of an art as h2o or phase. did i just say that out loud?

Sled_Dog 10-28-2001 08:53 PM
Real men watercool... and cool women do as well

decodeddiesel 10-30-2001 06:14 PM
pffffft.....aircooling :rolleyes: it's for OEM PCs and Volkswagons.

Sled_Dog 10-30-2001 07:41 PM
I remember that sign someone made on the [gay]forum of aircooling is for volkswagens I think I have it somewhere.

Edited by Kevin: I fixed the forum terminology ;)...

[ 10-30-2001: Message edited by: Kevin ]

Sled_Dog 10-30-2001 08:10 PM
http://www.1337info.com/images/volk.jpg found it

sloppycoder 12-22-2001 06:15 PM
ill show you! im getting 14 mixed fans (2nd hand) from a friend for christmas! i also have an old "victim" case and a pair of bad pliers. i will make the most monsterous air cooled setup ever! whahahah! whhhahahahah!

ill get back to you on this one.

seriously though, one of thems a papst 120mm and theirs 5 black label deltas 80mm too. that lot will be on the side panel!

slop

WebMasta33 12-23-2001 01:27 AM
Air cooling is for those who are can't afford watercooling yet.

I spent my 36 bucks on a SK-6... I now have everything except my drill press... Once I get that, watercooling will comence!!!

mad mikee 01-04-2002 12:35 PM
Yeah aircooling is crap....
 
(Check out the earlier post) Thats why my cpu (XP 1800) temp is at 36.5 c under full load...... (artic silver must have settled a little more.)
:evilaugh: :evilaugh: :cool: :D

mkosem 01-22-2002 06:46 PM
HAHAHA! my CPU temp is 24C full load. And the UPS guy hasn't even dropped off my pelts yet!

--Matt

decodeddiesel 02-01-2002 03:08 PM
"Yeah aircooling is crap...." Um Yup...
 
Quote:
Originally posted by mad mikee
(Check out the earlier post) Thats why my cpu (XP 1800) temp is at 36.5 c under full load...... (artic silver must have settled a little more.)
:evilaugh: :evilaugh: :cool: :D
14 fans? Are you deaf yet? Aside from the fact that that probably isn't the correct temp if you are using the Mobo socket probe (air seeps into the socket and throws off the temp) you setup is undoubtedly loud as hell. I can get those very same temps with 1 fan at 5v and VERY VERY quiet (Bladerunner is the only truely silent watercooler).

ksw 02-11-2002 07:54 AM
wonder how many people that have tried to make an cube in thin aliminium and put 5 fans on it and the side W/O fan (hole there, like under all fans) facing heatsink. that would push pretty much air through it, even if u use quiet fans.

iceheart 02-11-2002 09:46 AM
Perhaps it would start to levitate?

ksw 02-11-2002 09:58 AM
naaah. anything but that. it would proboly sound like a fat truck running @100mph but that is another thing... not to care about....

res0r9lm 03-12-2002 06:34 PM
1 Attachment(s)
I'm stuck with this pos air-cooled rig can't seem to get below 34c under load.

Haddy 03-24-2002 02:21 AM
Quote:
Originally posted by res0r9lm
I'm stuck with this pos air-cooled rig can't seem to get below 34c under load.
haha air cooled with what? thats only a 6c diff between ambiant and cpu....some watercoolers dont get that

res0r9lm 03-24-2002 03:59 AM
Quote:
Originally posted by Haddy
haha air cooled with what? thats only a 6c diff between ambiant and cpu....some watercoolers dont get that
I'm using a swiftech mcxc 370 w/ a duct with 120mm fan at one end and a 80mm at the other. before I used the duct 1612 was as high as I could go without errors and right now I am at 1654 vcore is 1.95 my temp has rosen to 41c full load

Haddy 03-24-2002 11:51 AM
Quote:
Originally posted by res0r9lm


I'm using a swiftech mcxc 370 w/ a duct with 120mm fan at one end and a 80mm at the other. before I used the duct 1612 was as high as I could go without errors and right now I am at 1654 vcore is 1.95 my temp has rosen to 41c full load
try running it @ stock and c what u get

ksw 03-24-2002 03:39 PM
ill see waht temps i get whith my P4 1.9ghz willamette and an MCX478-a running fan at full speed

res0r9lm 03-24-2002 06:09 PM
1 Attachment(s)
here is what I get at 1.4

Haddy 03-24-2002 07:56 PM
Quote:
Originally posted by res0r9lm
here is what I get at 1.4
not too shabby for air cooling only 1c over ambient

res0r9lm 03-24-2002 08:10 PM
acually 1c over case temps thats the beauty of a duct is that it's getting fresh air from outside of case which I estimate at 23c

Haddy 03-24-2002 08:37 PM
Quote:
Originally posted by res0r9lm
acually 1c over case temps thats the beauty of a duct is that it's getting fresh air from outside of case which I estimate at 23c
thats still pretty good

res0r9lm 03-24-2002 08:43 PM
Thanks


All times are GMT -5. The time now is 02:28 AM.
Page 1 of 2 1 2 >
Show 30 post(s) from this thread on one page

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...