Quote:
|
with no fans that thing only got lukewarm after hours of 3dmark looping. (no overclock at 1.5V).
|
The real problem is that when the pci bus gets up to 38 Mhz, 3dmark won't run on my computer, But prime 95 yes. 3d mark will hang the computer when arriving at about the 4th test and when the pci bus is overclocked up to 40mhz, then 3d mark won't even begin the first test
(my motherboard does not support the pci lock) and furthermore, when i tried to overclock the fsb to 133Mhz (so that the pci bus gets down to 33mhz) the computer do not even start
Quote:
|
One thing about the block, you have too little space between the grid and the four holes. Maybe to lose the four corner holes (do not drill them) to make some more space for sealant...
|
you are right
