Well im new to the forum but i would like to share my project with you! heh
Any how here is my project info.....
Take 2 server tower cases and 1 welder and make a big server tower.
2x Towers from local pc shop £35 inc. crappy psu but good to run fans off =P
1x Luberex Dielectric Lubricant
8x 120m fans
9x 80m fans
1x Swiftech MCW5002-PT Thermoelectric Waterblock (Intel Socket 478)
1x Arctic Silver 5
2x Danger Den Dual (5 1/4) Bay Reservoir
2x Hydor L30 with fittings 10m
2x Control Unit DYO – CTU01 – incl. SafeStart™ and NoiseControl™
2x Radiator RDT02 120mm DUAL, 10mm
1x 5m WaterChill tubes 10mm
1x WaterChill Anti Alga Fluid
1x Neoprene Gasket Material
1x HydrX Extreme-Duty UV Coolant
2x Heatkiller 120mm (Double) Fan Grill
9x 80mm Fan Grill
umm i think thats about it.
i have got most of the things i need but am still waiting for my swiftech block and my pelter power supply.
im going to be running watter systems 1 for the cpu and 1 for everything else. The main plan is to get the cpu pelter system working first then do the rest after.
just so you all know im using a p4 3gh for the cpu.
As you can probably tell is going to be quite a monster and at a guess VERY loud. The rads are going to be mounted on the top of the case's sucking air out. There will be 4 120mm fans on each all pushing air out the case. The other 9x 80m fans will be around the case sucking air in. due to the nature of everything beeing water colled there should not be that much heat and the rads should work fine. But i have given thought to making ducks to take air or blow air out.
I am just finishing off my photo shop plans and will upload later!
Alex