Actually, I could have placed the hoses lower, but I wanted to keep the hoses higher to keep the water in the radiator when I turned off the pump. This way the resivoir doesn't spill over. (I have a smaller one)
If I had a larger res, then I would have made the hoses come into the front of the case (from the side). I may do that next time, but I didn't have time to make the res before I fired it up.
I would suggest to anyone making this to consider placeing the tubes lower.
If anyone wants the specs to make one, I'll post the dimensions. If the rad case was any bigger, the tubing couldn't fit over the top of it into the case at the rights spot over the mobo. If it was any higher, the headloss from the pump would be considerable I think.
__________________
-winewood-
|