Pro/Forums - View Single Post

Brad · 11-26-2002, 01:05 AM

I bought it from one of the intel distributors in NZ.

The easiest way to ID a C1 stepping is to have a look at the sspec of the cpu in question. intel's support website has a list of the P4 sspec's and what stepping each sspec is. The voltage is the other way.

I am starting to see more and more C1's, I haven't seen anything below a 2.4 yet. About 50% of the 2.4's are C1's, while all of the 2.5, 2.6, 2.66, 2.8 seem to be C1's. About 50% of 2.53's are now C1's as well. I have only installed one 3.06ghz so far, all 3.06ghz (and all Hyperthreading P4's) are C1's

11-26-2002, 01:05 AM	#13
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I bought it from one of the intel distributors in NZ. The easiest way to ID a C1 stepping is to have a look at the sspec of the cpu in question. intel's support website has a list of the P4 sspec's and what stepping each sspec is. The voltage is the other way. I am starting to see more and more C1's, I haven't seen anything below a 2.4 yet. About 50% of the 2.4's are C1's, while all of the 2.5, 2.6, 2.66, 2.8 seem to be C1's. About 50% of 2.53's are now C1's as well. I have only installed one 3.06ghz so far, all 3.06ghz (and all Hyperthreading P4's) are C1's __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water