Ok here I'm posting the results for Cisco since he's here:
With my pump an Eheim 1250 on his system and the kryo unit off and running Sandra burning the temps were 36C turning the kryo unit on the temps were 33C with burn in running. (idle temp is 30C).
With his pump on the system the idle temps are 33C in bios. Haven't done it with the burn in running but we already know that his pump causes the system to be higher.
Here's my theory: His pump moves the water too fast.
His theory: the pump is adding heat to the water.
Who do you think is closest to the correct answer? His pump is hotter than mine due to the size, but since they are both inline pumps, then the heat should be put into the air not the water. I would see the heat issue for a submergable pump.
Now here is something else. the water temps with the system powered off and the kryo on are 23 after the kryo cold block and 22 after the pump (before the kryo)
More to follow after some more testing.
|