Pro/Forums - View Single Post

blue68f100 · 02-22-2006, 09:16 PM

Do you know how to connect to the server? No drives are required.
The detail info can be found by clicking on the snapappliance logo.

If you need instructions on how to reset the snap, let me know and I will send it to you.

The os is stored in flashram. For testing, install 1 drive (capacity does not matter, smaller the better for this exercise) in the front position, and set the drive to master. Power up. The snap will initialize the drive, format and install to OS. This takes about 10 minutes then you can reconnect.

02-22-2006, 09:16 PM	#23
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? Do you know how to connect to the server? No drives are required. The detail info can be found by clicking on the snapappliance logo. If you need instructions on how to reset the snap, let me know and I will send it to you. The os is stored in flashram. For testing, install 1 drive (capacity does not matter, smaller the better for this exercise) in the front position, and set the drive to master. Power up. The snap will initialize the drive, format and install to OS. This takes about 10 minutes then you can reconnect. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820