Pro/Forums - View Single Post - What do I need to make a Danner 500gph Pondmaster work with 1/2"id tubing?

krazy · 05-12-2004, 01:54 AM

It's not really a big issue.

Home depot has a pretty weak selection of barbs, from my experiences, but places liek Ace Hardware have enough to do the weird stuff (except they don't have any "good" 1/2"hose to 1/4"NPT barbs for some reason). I was able to get nice brass barbs to convert the male and female 1/2" pipe thread on my Danner Mag3 to 1/2" hose for about $2 per barb.

05-12-2004, 01:54 AM	#9
krazy Cooling Savant Join Date: Mar 2003 Location: St. Paul, Minnesota, USA Posts: 123	It's not really a big issue. Home depot has a pretty weak selection of barbs, from my experiences, but places liek Ace Hardware have enough to do the weird stuff (except they don't have any "good" 1/2"hose to 1/4"NPT barbs for some reason). I was able to get nice brass barbs to convert the male and female 1/2" pipe thread on my Danner Mag3 to 1/2" hose for about $2 per barb. __________________ Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150 Currently gathering parts to water cool everything! (read about the project)