Quote:
Originally Posted by JFettig
Ok, heres what I designed my block around. On a cpu, you have about 100w/sq cm on a peltier(50mm 220w) you have 220w/25sqcm thats only about 8.8w/cm.
On your block, you should just make it really shallow and wider, same as the lumpy channel block, but with more width. Ill post some pics of mine later.
Jon
|
Can't make it wider and still get water to flow through all the channels. I would have to add 7 more channels to cover the 50mm TEC. I don't have enough room for the channels, the cold plate mounting hardware, the top mounting screws, barbs and the mounting holes. The one pictured above is already 3"x3". :shrug: I am not even sure the AMD mounting holes will fit on it as is.