what ive seen is guys will place the evap in a really large plastic storage containers or ice chest cooler.
What you have to do is bend the tubes to the evap gets positioned off the base. Unwind the cappillaries towards the evap. Now bend the larger tubes to where you want the evap. You can place the evap into a container underneath or next to the base.
little coil pressurizes the liquid. Determines temps for idle and load. Not sure how it works but depends on the length of the tube.
Extreme overclockers or extreme systems is the best place to go. I think there is a sticky on one exactly like yours on extreme systems
http://www.xtremesystems.org/forums/...t=22968&page=1