Pro/Forums - View Single Post

bigben2k · 02-02-2003, 12:03 AM

I got the PSUs. They're big: I can tip over some components, but I'll have to replace some.

I took some pics (will be posted later). It was a challenging photo session, with my macro lens: pic#1 (open PSU back) exposures: f22, 10 seconds. f16, 6 sec and f11 3 sec (in a lit room, with ISO 200 film!)

Pic#2 (PSU back and above): f22, 8 sec, f16 4 sec and f11, 2 sec.

Light sources were a mixture of daylight/incandescent and fluorescent; the lab tech is going to have a funky time with the colors!

I found my power connectors, but I'll have to source them somewhere else.

I'll be looking at TI's solutions for adding VSENSE to a PSU. In the meantime, I might try to draw up a schematic of what I've got.

02-02-2003, 12:03 AM	#65
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	I got the PSUs. They're big: I can tip over some components, but I'll have to replace some. I took some pics (will be posted later). It was a challenging photo session, with my macro lens: pic#1 (open PSU back) exposures: f22, 10 seconds. f16, 6 sec and f11 3 sec (in a lit room, with ISO 200 film!) Pic#2 (PSU back and above): f22, 8 sec, f16 4 sec and f11, 2 sec. Light sources were a mixture of daylight/incandescent and fluorescent; the lab tech is going to have a funky time with the colors! I found my power connectors, but I'll have to source them somewhere else. I'll be looking at TI's solutions for adding VSENSE to a PSU. In the meantime, I might try to draw up a schematic of what I've got. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101