I've seen several discussions where people were looking for different sizes of single pass rads. Airspirit's database never really made clear which rads were Single and which were dual, and now that it is down, the information is even more needed.
I went through the catalog at Leakycar.com, and compiled the following list of FedCo numbers based on the pictures. As usual the sizes are for the fin areas ONLY, and don't include the tanks. As a very rough guide, I would add about 1.5" to the 'H' dimension for the tanks, more if the rad has end I/O fittings
A few other notes - The applications are not specific, they are what was listed in the catalog with the pictures.
I made notes on most of the I/O fittings, and define them as follows: (assume you are facing the fins, with the tanks at the top and bottom)
Face: fitting is on the same plane as the fins, pointing at you
Side: fitting is on one end of the tank, pointing to the left or right
End: fittings are on the top and bottom of the tank, pointing up or down.
Same: fittings are on the same corners of the tanks on each end (this is not the best for circulation in theory)
Opp.: fittings are on opposite corners of the tanks
not stated - I didn't make a note, look for yourself
but I think most are same
I'm not guaranteeing that this is 100% accurate, it's based on notes that I took a long time ago.
All dimensions in inches. Note that in many cases, especially when the rad has long pipes coming off the fittings, the dimensions for the I/O fittings apply only to the ends of the tubes, the actual pipe coming out of the rad may be smaller.
Code:
FedCo # H W T I O App and fitting notes
2-149 7.75 6.125 2 .625 .625 Ford face out / side in
2-208 7.75 6.125 2 .625 .625 Ford side
2-209 9.875 6.125 2 .75 .625 Ford side
2-210 9.875 6.125 2.5 .75 .625 Ford side
2-215 7.75 7.375 2.5 .625 .5 Chrysler side?
2-216 7.75 6.125 2 .625 .625 Ford side
2-217 7.75 6.125 2 .75 .625 Ford side?
2-272 9.875 6.125 2.5 .75 .625 Ford side
2-275 9.5 6.125 2 .75 .625 GM side
2-284 9.875 6.125 2 .75 .625 Ford side
2-285 7.75 6.125 2 .75 .625 Ford side?
2-317 9.875 6.125 2 .625 .625 Ford side
2-342 9.5 6.125 2 .75 .625 GM face outs, w long snaky pipes. .75 end is actually .625 @ rad
This is possibly the most popular single pass, it is from late 60's
Chevy pickups
2-353 9.5 6.125 2 .75 .625 GM side
2-549 5.25 6.375 2.625 .625 .625 Nissan / import end
2-551 5.25 6.625 2.625 .625 .625 Nissan / import face out / side in
2-553 6.375 6.125 2 .625 .625 Nissan / import opp. side
2-611 6.25 6.125 2 .625 .625 Toyota / GM imports Opp corner end outs
2-617 9.875 6.125 2 .625 .625 Ford L 800 / 900 truck Side outs
2-726 7.625 9.75 1.125 .625 .625x2 Ford has odd plumbing, note 2 outs / 1 in
2-766 14.188 3.25 1.625 .625 .625 Renault end
2-770 9.188 6.875 1.625 odd .625 Winnebego end I/O odd fitting is an o-ring
2-531 20.5 3.125 2 .625 .625 Ford Econoline rear, 75-91 face / side
Hope this is helpful to someone....
Gooserider