Lots of little and not so little things done. The whole inside has been plated with aluminum sheet and painted. All the holes for the power cables, tubing etc have all been drilled. The actual construction is done now, just assembly and painting left to go. Right now Im finishing up on my last coat of Bondo on the screw holes, etc.
Hard drive/powersupply side. Hard to see anything actually.
Motherboard Side, the holes are for the cables to run into the seperate power supply box, they have foam between to minimize any abrasion to the cables and also to eliminate airflow between the different sections.
Top view where you can see the interior lid of the power supply box. The power supply is completely seperate from the entire computer and has absolutely no role in cooling anything but itself. Its fed by its own 120mm fan.
Motherboard side showing holes in the base for the water-cooling tubing. The set of holes at the back is for the CPU and the ones in the front for the GPU. The tubing for the CPU will go behind the motherboard and over. The ones for the GPU just up and in.
Back view. Cardboard is in preparation for painting the outside.
Currently Im still busy plating the doors with Aluminum, and making the front bay door which will keep dust off the cd/dvd etc.