Temps seem high to me... q9550 on water...
well my temps seem really high to me... getting 61C 61C 58C 58C according to real temp and core temp (at one point in time I had an x3210 (Intel 65nm Quad, Kentsfield G0) @ 3.2GHz @ 1.18V under load @ 45c 45c 42c 44c... nothing has changed other than the CPU and I didnt open the WC loop when i did this
room temp is around 20-22c
rig:
CPU q9550 E0 Lapped and polished @ 3.82GHz @ 450 x 8.5 @ 1.246v under LinX Load
Mobo: Gigabyte EP45-UD3P
Water Block: Original Danger Den TDX water block, Lapped and Polished and resently cleaned with a #1 nozzle
Pump: Danger Den D4
Radiator: 1977 Bonneville Heater core with custom fan shroud
fans: 2 Thermaltake A1280 120mm fans
http://www.newegg.com/Product/Produc...82E16811999113
the fans are pulling thru the radi from outside the case
tubes: Primochill 1/2
route pump --> radi --> block --> t line --> pump
Heatsink goop: AS5