Quote:
|
Originally Posted by jimeu
can anyone share instructions on how to open the snap 1000 ? after I remove the bottom cap it is hard to take out the inner metallic case plus the on/off button sticks through the plastic case.
I have a snap1000 with a 30GB and want to upgrade it with a 120GB drive.
jaime
|
It shouldn't be too hard to open the casing.
1. Remove the 4 screws in the rubber feet’s
2. Hold the device in your lap and press the plastic cover out on the sides, then try to shake the metallic box loose by shaking up and down. Flip the snap over so you can se the bottom and check that all the plastic clips are out of there sockets. If not, help the one needing attention, and flip it around to get some help from gravitation while you shake it up and down
3. While/after the plastic cover is coming of check for the little plastic bit that deliver the lights to the front. (Saves an assembly if you have it in place)
4. If not already lose, open the lid of the box, it doesn't require any screwing and was very loose on my device.
Regards
/rbt