Pro/Forums - View Single Post

Brad · 07-24-2002, 03:10 AM

I've always had the idea of something like that in the back of my mind. Zalman/Thermalright/Dynatron/Coolermaster and even more manufacturers would all be possible to use.

I own a Dynatron 60fin heatsink, what I would do would be something like what I've attached. It would be about 90mm x 60mm, the width is due to the twin 1/2" barbs. My main concern is leaking

07-24-2002, 03:10 AM	#57
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I've always had the idea of something like that in the back of my mind. Zalman/Thermalright/Dynatron/Coolermaster and even more manufacturers would all be possible to use. I own a Dynatron 60fin heatsink, what I would do would be something like what I've attached. It would be about 90mm x 60mm, the width is due to the twin 1/2" barbs. My main concern is leaking __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water