Certainly!
HereĀ“s some more pictures.
Soldering parts together:
Aligning the water-chamber:
Almost done:
Sealing is done by using silicone, in combination with 3mm screws.
RAM-cooling:
I used the original aluminium "cooler" on the opposite side, modified with some coolersinks glued to the aluminium.
Temps are pretty nice. Atm 31degr.C, with water-temp @ 27,8degr.C.
Stressing the GPU, results in 6 to 8degrees above water-temp, so the cooler seems to do the job.