Pro/Forums - View Single Post

Moto7451 · 02-01-2007, 10:18 PM

You may want to try putting the barbs further apart in order to maximize flow through the fins. Since the water will try to take the path of least resistance, the boundary areas may not see the same flow as the inner area.

02-01-2007, 10:18 PM	#4
Moto7451 Cooling Neophyte Join Date: Jan 2005 Location: LA, CA Posts: 53	Re: My Peltier Waterblock You may want to try putting the barbs further apart in order to maximize flow through the fins. Since the water will try to take the path of least resistance, the boundary areas may not see the same flow as the inner area. __________________ Athlon 64 3200+ Rev F @ 2.4Ghz (and climbing) @ 1.53v, DFI Infinity UltraII-M2, 512MB Apple Micron D9 DDR2 @ 400MHz (DDR2 800) 5-5-5-12 @ 2v, 128MB Radeon X800 @ 460/900, Dual 120GB HDs in RAID 0 Loop 1: D5 Pump • Bonneville w/ AC Heater Core • Swiftech MCW6002 • Gemini Tsunami VGA block • Gemini Tsunami S478 block (cold side chiller block) 110W 16v TEC @ 60W 12v Loop 2: PC Watercooling Shop 12v Water Pump • PCWCS 80.2 Rad • Gemini Tsunami (hot side chiller block)