Pro/Forums - View Single Post - Reservoar like Tank-O-Matic (work in progress)

trodas · 12-10-2004, 05:34 AM

JWFokker - not a single problem. Not only dril the hole, but most importantly - made the thread there

So you will just screw the barb and enjoy... Don't need to overtight it anyway. It holt under pressure pretty well, see below.

Cranky - thanks

And it's getting better, I fixed the flue-crack-looking thing, so by beta 1 res is visually pretty fine. (I keep my alpha 1 anyway, works fine, survived pressure test as well - and the cracks are virtually invisible from half meter up away) There remain only slight glue-maps but Im just a guy - not a automat. I can't made always 100% right amount of glue...

Anyway, nice, one, is not it?

http://ax2.old-cans.com/show.php?p=r...&d=1&id=45&c=8

...and testing by almost 5 atm:

12-10-2004, 05:34 AM	#15
trodas Cooling Neophyte Join Date: Sep 2004 Location: Czech republic Posts: 22	JWFokker - not a single problem. Not only dril the hole, but most importantly - made the thread there So you will just screw the barb and enjoy... Don't need to overtight it anyway. It holt under pressure pretty well, see below. Cranky - thanks And it's getting better, I fixed the flue-crack-looking thing, so by beta 1 res is visually pretty fine. (I keep my alpha 1 anyway, works fine, survived pressure test as well - and the cracks are virtually invisible from half meter up away) There remain only slight glue-maps but Im just a guy - not a automat. I can't made always 100% right amount of glue... Anyway, nice, one, is not it? http://ax2.old-cans.com/show.php?p=r...&d=1&id=45&c=8 ...and testing by almost 5 atm: __________________ "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire ...just keep folding, just keep folding... my config - my caps Last edited by trodas; 12-10-2004 at 05:45 AM.