Quote:
Originally Posted by satanicoo
From what i see the cascade is more resistive than the white water?
And in this case a 1250 equals a mcp600 for the white water.
Could you put there a cascade + heatercore flow vs pressure grafh?
It would represent a more realistic situation, the mcp would look way better, and the iwaky md20 yummy
|
Yes, Cascade is more restrictive than the White Water. Only the first rev Cascade prototypes were less restrictive. As you can see though, despite being about 50% more restrictive, it typically makes for just a 5-15% difference in volumetric flow rates due to the shape of the curves.
What heater-core?
I use the Camry cores ("Big Arse"). Flow rates with the core attached are typically 5% less than where block lines intersect the pump lines for most scenarios when the math is worked out. The Camry cores have about a 0.7mH2O PD at 10LPM with the 1/2" copper-tube fittings I use.