Arivaldo, thanks for the specs, but am a little curious. Your specs are indeed showing that G1/4 is the same as 1/4" BSP, which is what I used. In fact the G-spec is the ISO standard name definition for BSPP. Indeed, the barbs largely screwed in by hand for about 3 full turns before needing tightening. No way that I could do that even with Delrin if I was using NPT threads.
So a little unsure about your statement about me needing to be careful about it, unless you're talking about US people attempting to crank in 1/4" NPT threaded barbs into a G1/4 threaded hole.
|