HELP!!
Quote:
Originally posted by bigben2k
Phil: you should put all this aside, and look at your +3.3 line: it's below spec.
Spec is +/- 5%. For a 3.3 line, that means it should be between 3.135 and 3.465v.
|
so that is bad? how can i change that? its a 550W Q-Tec power supply, i know its not great, but it works fine with me.. or should i consider changing it? advice needed!!
__________________
NF7-S Rev 2
XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting)
Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3)
IBM Deskstar 80gig ata100 hard drive
Pioneer dvd-rom/dvd-rw
Xaser 2 case modded with 120mm side fan
Thermalright SLK-900U + 92mmm Tornado fan
Vantec 205SL Fan controller (controlling the 120mm fan and Tornado)
Enermax 460W PSU
Geforce 3 Ti 200 64mb
|