^ Looks about right, using DD or D-Tek 1/2" tubing adaptor.
Just note, our data is based on 12.5-13V, not 12V.
Most power supplies run at 12.6 volts, as we tested.
I will do a series MAG test this weekend, using DD's fitting and post results.
Dave
** Note 12.6 volts is average of 10 different power supplies we tested. It was suggested to me that I do not indicate all supplies run above 12V, as it can be mis-leading, which is the last thing we want.
Last edited by Dave; 07-13-2005 at 05:10 PM.
|