Ok, I see what you mean.
The blower is the one I'm really concerned about
: although I'll be running it at only 5 volts, I found a similarly sized unit at the same Surplus Center, and this thing will draw 10.5 amps, at 12 volts:
http://www.surpluscenter.com/item.as...tname=electric
I'm also keeping in mind that there's a < ~200 millisecond delay, between the PSU voltages getting to their respective voltages, and the "PWR_GOOD" line coming on.
I need to figure out the amp draw of that blower, at 5V, so I can spec an EMI filter. Ok, time to go through the Digikey catalog again!