Pro/Forums - View Single Post

airspirit · 08-18-2003, 12:39 PM

Okay, I'm looking at the following power plug:

http://www.allelectronics.com/cgi-bi...513&type=store

This is a regulated one, so it SHOULD be good, methinks. I'm ordering a 10K pot for the contrast and a 1K on/off pot for the brightness (it uses 4.2V IIRC, this allows me to turn it off if I don't want it on). I'm going to fuse out the PSU like you did (500 mA or so). So, this leaves me with the following parts that I'll need, right?

Momentary switch
10 Ohm/.5W resistor
12K Ohm/.25W resistor
100nF capacitor (regular type, I assume)

That sound about right?

08-18-2003, 12:39 PM	#40
airspirit Been /.'d... have you? Join Date: Jul 2002 Location: Moscow, ID Posts: 1,986	Okay, I'm looking at the following power plug: http://www.allelectronics.com/cgi-bi...513&type=store This is a regulated one, so it SHOULD be good, methinks. I'm ordering a 10K pot for the contrast and a 1K on/off pot for the brightness (it uses 4.2V IIRC, this allows me to turn it off if I don't want it on). I'm going to fuse out the PSU like you did (500 mA or so). So, this leaves me with the following parts that I'll need, right? Momentary switch 10 Ohm/.5W resistor 12K Ohm/.25W resistor 100nF capacitor (regular type, I assume) That sound about right? __________________ #!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied Last edited by airspirit; 08-18-2003 at 12:46 PM.