Pro/Forums - View Single Post

matery · 05-02-2011, 03:03 AM

Hi,
I have been trying to upgrade my existing 2x250GB HDD on Snap Server 210, to 2x2TB Hitachi drives. GOS installed is 4.2x (I also hv GOS 5.x gsu's), what I have done so far is:
Replaced drive 2 with the new one(2TB) and restarted the server, server booted as normal. On Disks/Unit section I can see the hitachi drive unassigned as 1929GB with yellow symbol with three dots inside. The Drive 1 shows as Disk(250GB) OK with Green round symbol. When I try to build the RAID, in RAID Sets section, it shows me 250GB drive available for RAID and no 2TB drive. My question is how do I assign and mount the drive 2 (2TB) on the system, so that I can add it to the RAID and then replace my second 2TB Drive on the system to have a 4TB space.

05-02-2011, 03:03 AM	#1
matery Cooling Neophyte Join Date: Jul 2006 Location: london Posts: 29	Upgrading Snap Server 210 to 4TB HDD Hi, I have been trying to upgrade my existing 2x250GB HDD on Snap Server 210, to 2x2TB Hitachi drives. GOS installed is 4.2x (I also hv GOS 5.x gsu's), what I have done so far is: Replaced drive 2 with the new one(2TB) and restarted the server, server booted as normal. On Disks/Unit section I can see the hitachi drive unassigned as 1929GB with yellow symbol with three dots inside. The Drive 1 shows as Disk(250GB) OK with Green round symbol. When I try to build the RAID, in RAID Sets section, it shows me 250GB drive available for RAID and no 2TB drive. My question is how do I assign and mount the drive 2 (2TB) on the system, so that I can add it to the RAID and then replace my second 2TB Drive on the system to have a 4TB space. Last edited by matery; 05-02-2011 at 03:12 AM. Reason: mistakes