Pro/Forums - View Single Post

Scrooge · 11-14-2005, 04:46 PM

Certainly!
Here´s some more pictures.
Soldering parts together:

Aligning the water-chamber:

Almost done:

Sealing is done by using silicone, in combination with 3mm screws.

RAM-cooling:

I used the original aluminium "cooler" on the opposite side, modified with some coolersinks glued to the aluminium.

Temps are pretty nice. Atm 31degr.C, with water-temp @ 27,8degr.C.
Stressing the GPU, results in 6 to 8degrees above water-temp, so the cooler seems to do the job.

11-14-2005, 04:46 PM	#232
Scrooge Cooling Neophyte Join Date: Nov 2005 Location: Norway Posts: 5	Certainly! Here´s some more pictures. Soldering parts together: Aligning the water-chamber: Almost done: Sealing is done by using silicone, in combination with 3mm screws. RAM-cooling: I used the original aluminium "cooler" on the opposite side, modified with some coolersinks glued to the aluminium. Temps are pretty nice. Atm 31degr.C, with water-temp @ 27,8degr.C. Stressing the GPU, results in 6 to 8degrees above water-temp, so the cooler seems to do the job.