Pro/Forums - View Single Post

bigben2k · 03-17-2003, 07:57 AM

A minor bit of progress.

I forced the PSU on, to find 5.2 and 11.71 volts on output, with no load. The 12V line drops to 11.66 with a CCFL tube on. I guess this one's gonna need tweaking, along with all the other ones!

Seeing that the innards of this PSU is quite voluminous, the watercooling part will have to be put on hold, along with the slimming down.

At this point, I would much prefer to find an external solution to mounting these in an array. Yu_duh's solution is actually very feasible, and relatively easy, so I might go with that, until I find or come up with something better.

[edit] The PSU fan is very quiet, and effective.

03-17-2003, 07:57 AM	#78
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	A minor bit of progress. I forced the PSU on, to find 5.2 and 11.71 volts on output, with no load. The 12V line drops to 11.66 with a CCFL tube on. I guess this one's gonna need tweaking, along with all the other ones! Seeing that the innards of this PSU is quite voluminous, the watercooling part will have to be put on hold, along with the slimming down. At this point, I would much prefer to find an external solution to mounting these in an array. Yu_duh's solution is actually very feasible, and relatively easy, so I might go with that, until I find or come up with something better. [edit] The PSU fan is very quiet, and effective. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 03-17-2003 at 09:40 AM.