Pro/Forums - View Single Post

bowman1964 · 11-19-2002, 08:51 PM

Rattlehead thanks for the compliment.
little update.

and i spent 3 hours sunday morning soldering the block up.but now block is together.monday i let acid set in the block to clean it some after the solder and heat got to it....now i have finish machined it and currently being pressurized for leaks.280 psi for a day or two i hope will do it.so with a little luck this weekend i can get the chiller cranked up and see if it works.
block being tested.

11-19-2002, 08:51 PM	#93
bowman1964 Cooling Savant Join Date: Jul 2002 Location: virginia usa Posts: 126	Rattlehead thanks for the compliment. little update. and i spent 3 hours sunday morning soldering the block up.but now block is together.monday i let acid set in the block to clean it some after the solder and heat got to it....now i have finish machined it and currently being pressurized for leaks.280 psi for a day or two i hope will do it.so with a little luck this weekend i can get the chiller cranked up and see if it works. block being tested. __________________ xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore. custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c only one like it.in one case. custom r502 cooling unit 3D2001SE 21315 3DMARK03 6659