Pro/Forums - View Single Post

MadDogMe · 03-25-2003, 05:55 AM

That block/pic shown is going to go on the side of the H/Drives is'nt it?, you'll have one of those on both sides right?. You might want to take a look at the small chips on the PCB of the HD's, on my GPX60 there are two small ones and one large. One of the small ones gets VERY hot, the other gets hot, the large one just gets warm. The two small chips could use some cooling, passive large surface area HS maybe is what I was thinking...

I was thinking of putting fins on the side where you have H20 blocks in mind...

03-25-2003, 05:55 AM	#2
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	That block/pic shown is going to go on the side of the H/Drives is'nt it?, you'll have one of those on both sides right?. You might want to take a look at the small chips on the PCB of the HD's, on my GPX60 there are two small ones and one large. One of the small ones gets VERY hot, the other gets hot, the large one just gets warm. The two small chips could use some cooling, passive large surface area HS maybe is what I was thinking... I was thinking of putting fins on the side where you have H20 blocks in mind...