I've seen that being done, but with a regular HeaterCore. Havent seen it with a BIX. Might work.
The problem with the fan mouting holes is that they are smaller then they should (imo). Trying to put a screw from one side to the other should prove to be somewhat difficult. I used (like i said before) screws small enought not to damage the BIX, and secured the fans to the shroud .
To try to do something like that, i guess you need to find a 3mm (diameter) screws with at least 50mm lenght to clear across the BIX. GL.
__________________
"we need more cowbell."
|