Pro/Forums - View Single Post

Redken · 05-06-2004, 07:08 AM

This rig is cooling a very hot P4 2.4c @ 3.5, AIW 9800 450 core and NB and it's giving me 6c above ambient idle and 10c load. Although I measured using MBM5 and a temp probe I don't really know how accurate these readings are. I have asked on other threads but there is too much conflicting information and I'm lacking the tools to find out for myself. Even if I add 10c more I would still be happy with my temps

It was a good project and it was very worth it, I had a lot of fun and learned a lot. Looking forward to learning more from it and helping out newbees

with what I can.

"Comments" is one of the reasons I posted this, so, any and all are welcome.

05-06-2004, 07:08 AM	#2
Redken Cooling Neophyte Join Date: Feb 2004 Location: Puerto Rico Posts: 15	This rig is cooling a very hot P4 2.4c @ 3.5, AIW 9800 450 core and NB and it's giving me 6c above ambient idle and 10c load. Although I measured using MBM5 and a temp probe I don't really know how accurate these readings are. I have asked on other threads but there is too much conflicting information and I'm lacking the tools to find out for myself. Even if I add 10c more I would still be happy with my temps It was a good project and it was very worth it, I had a lot of fun and learned a lot. Looking forward to learning more from it and helping out newbees with what I can. "Comments" is one of the reasons I posted this, so, any and all are welcome. __________________ P4C800E DL,P4 2.4c @ 3.4(droop mod),1G Mushkin 3500 II 2,2,2,8 @ 3.1v,AIW 9800 Pro (450/370 @ 1.9v core),Audiology Platinum,2xDiamonds 8mb Raid0,Lian-Li Pc70,PC P & Cooling 510D,Plextor 708A,Plextor 52x32x52...water cooled...