[bowman1964]

well so far this is going to be my chiller mounted in the back of the pc behind the compressor.not very large but compact and cold i hope.return line from evaperator going into small resivoir.coiled tubing with return coolant from chipset and video card spraying though a spray bar mounted on the bottom of the small tank.upwards untill the coolant overflows into the pump chamber area where a small 200 gph or so pump will circluate the coolant to the video and chipset and back into the tank.now when the freon gets back to the compressor it will be a gas completly and i get some extra cooling out of it.
this will work alot easyer in a case.one freon line is bad but if i had 2 or 3 ....i would never be able to work on it from all the cluter.water lines on the video and chipset are no problem.and if i want extra cooling on the video i can always pull out one of 5 or 6 peltiers i have sitting around.