Quote:
Originally Posted by File
What would be great is some instructions on creating your own resevoir. Currently getting together/building the parts for my own watercooling system and could use some info on the resevoir. Especially things like measurements for the 5-3/4" bay res =\ I've got some acrylic glass here in 1/4" thickness and I'm looking to build one but do not know where to start~
|
acrylic is both a great material and a pita material. for the best possible look and quality, it should be laser cut and should be glued with a glue containing methylene chloride. I use something called IPS "
weld-on 3". it actually chemically bonds the acrylic together and makes it like one solid piece.
if you don't or can't laser cut, use the largest saw blade possible - as this will give you the straightest cut. weld-on won't work well unless the edges are very true and straight
finally, don't use fittings that use pipe thread as they have a tendency to crack acrylic
you want a fitting with a rubber washer and a flange - get thread specs elsewhere on the forum
jman
ps don't use silicon to seal anything as silicon is NOT designed for full immersion and WILL leak after prolonged exposure